Sanitising your Love Water Maxi Water Cooler is essential for maintaining optimal hygiene, and it’s made simple by regularly replacing the water trail. Here’s a step-by-step guide to change the water dispenser water trail:

  1. Preparation: Before starting, ensure the water bottle is empty. It’s recommended to change the water trail every 3 to 4 months for the best results.
  2. Removing the Old Water Trail:
    • Start by removing the bottle from the top of the dispenser.
    • Open the new water trail package and put on the gloves provided. This ensures cleanliness throughout the process.
    • Lift the lid of the cooler and locate the water trail, which is held in place by two blue clips on either side.
    • Carefully unclip these blue sides and lift out the old water trail. Be cautious as it may contain up to 2 litres of water, making it a bit heavy.
  3. Inserting the New Water Trail:
    • Take the new water trail and align the white unit on it.
    • Gently place the new water trail into the dispenser, making sure it’s seated properly.
    • Press down on the blue sides of the trail until they securely clip into place, ensuring that the trail is stable and won’t move during use.
    • Close the lid and make sure it’s securely in place.
  4. Final Steps:
    • Once the new water trail is installed, you can place a fresh water bottle on top of the dispenser. Your machine is now fully sanitized and ready for use.

By following these steps, your Maxi Water Cooler will remain 100% hygienic, ensuring clean and safe water for everyone.